Tampa Bay · Frameless specialists
Custom Frameless Shower Doors Installed in Tampa, FL
See the tile, not the door. We template the opening you already have, cut the glass to it, and set the hardware in the finish you picked.
- Glass
- 3/8" and 1/2" tempered
- Hardware
- Brushed brass · Chrome · Matte black
- Counties
- Hillsborough · Pinellas · Pasco
What we build
Every enclosure starts as a measurement
Frameless Shower Doors
Tempered glass held by hardware alone, cut to the opening you have
Read moreShower DoorsSliding Shower Doors
For openings where a swinging panel has nowhere to go
Read moreShower DoorsSwinging Shower Doors
One hinged panel, and the clearance it needs to work
Read moreShower DoorsNeo-Angle and Corner Enclosures
Three panels meeting in a corner, with no room for error in the angle
Read moreShower DoorsStationary Glass Panels
A fixed panel, no door, and nothing to keep clean but the glass
Read moreShower DoorsCustom Shower Enclosures
Ceiling-height and steam enclosures, where the opening stops being standard
Read moreGlass & HardwareShower Glass Options
Clear, low-iron, rain and frosted, and what each one hides
Read moreGlass & HardwareShower Door Hardware and Finishes
Hinges, clamps, handles and towel bars, in the finish the room already uses
Read moreServiceShower Door Repair and Adjustment
Doors that drag, leak or will not stay shut
Read moreRecent work
Cut to the opening, not to a catalog
How a job runs
Three steps, and the first one decides the other two
- 01
We template the opening
Somebody comes out and measures the wall you actually have, not the wall the catalog assumes. Out of plumb, out of square, a curb that slopes: all of it changes the cut.
- 02
The glass is cut to it
Tempered glass cannot be trimmed after it is tempered. That is why the measure comes first and why a panel that arrives wrong is a new panel, not an adjustment.
- 03
Hardware set, door hung
Hinges and clamps anchored into blocking or into the tile with the right fastener, then the door is adjusted until it closes on the first try and stays where you leave it.
Where we work
Across the Tampa Bay area
Three counties. Every panel is templated on site before it is cut, whichever side of the bay it is on.
Hillsborough County
13 cities- Tampa
- Brandon
- Riverview
- Valrico
- Seffner
- Mango
- Temple Terrace
- Apollo Beach
- Gibsonton
- Ruskin
- Sun City Center
- Balm
- Lutz
Pinellas County
8 cities- Clearwater
- St. Petersburg
- Palm Harbor
- Dunedin
- Safety Harbor
- Seminole
- Largo
- Bay Pines
Pasco County
5 cities- Wesley Chapel
- Land O' Lakes
- Odessa
- Trinity
- New Port Richey
Your town is not on the list? We still measure it.Call (813) 993-2319
FAQ
Questions people ask before they buy
How thick is the glass in a frameless shower door?
+
Why does clear shower glass look green at the edge?
+
Can you install a frameless door on any shower?
+
Which areas around Tampa do you cover?
+
Free measure
Tell us about the opening
The measure costs nothing and it is the only way to price a frameless enclosure honestly. Send what you have and somebody will come look at it.
- No stock sizes, every panel cut to your wall
- Tempered glass in 3/8" and 1/2"
- Hardware matched to the fixtures already in the room